Immediately when paraffin-based crude oils were introduced, accumulation of asphaltenes in the flow lines of a well has been the major inhibiting factor towards a smooth flow of the crude oil. Every year, there have been many wells that experience substantial production losses due to asphaltenes build up to an extent that some have been abandoned altogether. For this reason paraffin removal oil wells is very critical to the productivity of any well.
Oil producing countries have tried all they can to make sure a permanent solution has been found to eliminate the problem of asphalting accumulation along the transportation channels of the kerosene. They have invested billions of money to find a cure to this problem but nothing viable has been found yet. For this reason, this mechanism works nicely for removing this kerosene waxing on oils lines and storage tanks.
For us to ensure that there is no accumulation of asphaltenes, one can physically remove the buildup. In this approach, the one operating the plant will use available cutting equipment and flow line scrappers to remove unwanted components. The advantage of this method is that there will be no stoppage of the production process as the removal is being done. In this way production continues normally as well l as eliminating unwanted materials.
Apart from using coiled tubes and scrapping mechanism to prevent waxing on oil pipes, another mechanism that can be employed is the use of chemicals to remove the waxing along the pipes and also storage tanks. Chemicals can be chosen depending on the nature of waxing that has build-up on the pipes. This will indeed increase your production and efficiency.
If the unwanted materials are obstructed and cannot be easily reached as would be the case in pipes. Mechanical and thermal technique cannot be used. In this case hot water or steam will be thrust at a high pressure carrying away the impurities
The operator may also choose to use the Chemical remediation techniques which not only remove the impurity, but also prevent further deposition of the unwanted materials. However, this technique is rarely used as a standalone solution since it is mainly used in conjunction with the mechanical methods. As such, this technique is quite expensive and should only be used in severe cases where other methods fail to achieve the desired results.
Another appropriate method is by stimulation. These is where plant and other biodegradable materials to breakdown these impurities. This method has received much support from different corners as it will greatly conserve the environment compared to other method that used toxic substances which lead to pollution. This is because the materials used are environmental friendly and easily decompose.
Clearly, as a well operator, you will be spoilt of choice when searching for a method to use in dealing with asphaltenes in your well. You should however weigh all the methods available and only choose the one that best addresses your situation. In so doing, you will be able to completely eliminate impurities in your well and thus making it operate at optimum levels.
Oil producing countries have tried all they can to make sure a permanent solution has been found to eliminate the problem of asphalting accumulation along the transportation channels of the kerosene. They have invested billions of money to find a cure to this problem but nothing viable has been found yet. For this reason, this mechanism works nicely for removing this kerosene waxing on oils lines and storage tanks.
For us to ensure that there is no accumulation of asphaltenes, one can physically remove the buildup. In this approach, the one operating the plant will use available cutting equipment and flow line scrappers to remove unwanted components. The advantage of this method is that there will be no stoppage of the production process as the removal is being done. In this way production continues normally as well l as eliminating unwanted materials.
Apart from using coiled tubes and scrapping mechanism to prevent waxing on oil pipes, another mechanism that can be employed is the use of chemicals to remove the waxing along the pipes and also storage tanks. Chemicals can be chosen depending on the nature of waxing that has build-up on the pipes. This will indeed increase your production and efficiency.
If the unwanted materials are obstructed and cannot be easily reached as would be the case in pipes. Mechanical and thermal technique cannot be used. In this case hot water or steam will be thrust at a high pressure carrying away the impurities
The operator may also choose to use the Chemical remediation techniques which not only remove the impurity, but also prevent further deposition of the unwanted materials. However, this technique is rarely used as a standalone solution since it is mainly used in conjunction with the mechanical methods. As such, this technique is quite expensive and should only be used in severe cases where other methods fail to achieve the desired results.
Another appropriate method is by stimulation. These is where plant and other biodegradable materials to breakdown these impurities. This method has received much support from different corners as it will greatly conserve the environment compared to other method that used toxic substances which lead to pollution. This is because the materials used are environmental friendly and easily decompose.
Clearly, as a well operator, you will be spoilt of choice when searching for a method to use in dealing with asphaltenes in your well. You should however weigh all the methods available and only choose the one that best addresses your situation. In so doing, you will be able to completely eliminate impurities in your well and thus making it operate at optimum levels.
About the Author:
You can visit www.petro-genesis.com for more helpful information about Paraffin Removal Oil Wells And Their Importance.
No comments:
Post a Comment